pf::Switch::Cisco::Catalyst_3550 - Object oriented module to access and configure Cisco Catalyst 3550 switches
This module is currently only a placeholder, see pf::Switch::Cisco::Catalyst_2960.
IOS 12.2(44)SE6 is known to work.
Because a lot of code is shared with the 2960 make sure to check the BUGS AND LIMITATIONS section of pf::Switch::Cisco::Catalyst_2960 also.
For some reason when securing a MAC address the switch loses an important portion of its config. This is a Cisco bug, nothing much we can do. Don't use this IOS for VoIP. See issue #1020 for details.
Known issues with IOS 12.2(35)SE5
IfIndex on this platform is not the same as port # or dot1d port.
Translate RADIUS NAS-Port into switch's ifIndex. This switch's NAS-Port behavior is different than the 2960.
We considered changing the dependency chain to the 2950 but we think we have less chances of breaking things if we just do the proper translation here because we would have heard if port-security was broken anyway. That said, if you hear about MAC-Auth / 802.1x regressions consider making this method do per-IOS translations.
Inverse inc. <info@inverse.ca>
Copyright (C) 2005-2015 Inverse inc.
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.